How to deal with stainless steel wire mesh rust, what are the methods?
The stainless steel wire mesh is kept dry and clean after being treated in a rusted place, and passivation still occurs after a while.
In the process of making and installing stainless steel parts, you should pay attention to the following aspects:
1. Whether it is stainless steel raw materials or processed parts in transportation, loading and unloading, special hoisting transport tools should be used to avoid contact between stainless steel and other hard carbon steel such as steel wire rope to avoid bumping and scratching the surface.
2. The processing site of stainless steel parts should be relatively stable, and the rubber sheet should be padded on the workbench to avoid damage to the stainless steel surface.
3. When the stainless steel parts are cut, the plates should be cut by shear or plasma; the pipes and other profiles should be cut by plasma or saw. When cutting, pad the rubber pad to avoid damage. After plasma cutting, the cutting residue should be cleaned in time; when sawing, the clamping should be protected by padding. After sawing, clean the saw oil and residue in time.
4. Before installing and welding stainless steel parts, you must carefully clean the surface of the oil, dust and other debris. Argon arc welding should be used when welding. If manual arc welding is used, fast welding with small current is applied, and arcing in non-welded areas is strictly prohibited. The ground wire should be selected at an appropriate position, and the connection should be firm to avoid excessive burnt surface or burned area; stainless steel flat shovel should be used for welding, and carbon steel flat shovel should not be used. The weld should be carefully ground to make the weld and the wood surface transition, and there should be no quality defects such as slag, pores, undercuts, splashes, cracks, and unfusion.
5. After the welding of stainless steel parts is completed, the surface should be cleaned in time.
6. After the surface treatment of the stainless steel screen parts is completed, attention should be paid to the protection of the finished products to avoid the touch of personnel and avoid secondary pollution by oil, dust and the like.
Let me introduce you to one of our company's products: stainless steel welded wire mesh
Stainless steel welded wire mesh is made of 316 316L 304L 304HC 304 302 and other excellent grade stainless steel. It is made by precise automatic mechanical technology. The mesh surface is flat, the structure is firm and the integrity is strong. Even if it is partially cut or partially stressed, it will not be loose. phenomenon.
Stainless steel welded wire mesh has strong anti-corrosion and anti-oxidation ability, strong welding point, strong pulling force, bright surface, good corrosion resistance and rust-free. The product is made by precise automatic mechanical technology, the mesh surface is flat and the structure is firm. , the overall strength, even if the local cutting or partial pressure is not to cause looseness
Stainless steel welded wire mesh use: stainless steel welded wire mesh can be widely used in civil construction batch cement, raising chicken, duck, goose, rabbit and zoo fence. Protection of mechanical equipment, highway guardrails, fences in stadiums, protective nets for road green belts. Can also be used in the construction industry, roads, bridges for reinforcement. Used for mechanical protection, industry, agriculture, construction, etc.
The company has the most advanced looms, strong technical force, scientific process, perfect quality inspection system, stainless steel welded wire mesh produced by high-quality raw materials, and other products with different specifications and various specifications. Our factory can also customize wire mesh products of different specifications according to the requirements of customers.
PREVIOUS： Stainless steel wire mesh product introduction
NEXT：Stainless steel wire mesh for acid and alkali in stainless steel filter mesh
