What should I do with the daily care of the stainless steel filter cartridge?
The material of the filter cylinder: stainless steel filter cylinder, copper filter cartridge, various metal alloy filter cartridges.
Material: stainless steel square mesh, stainless steel mesh and stainless steel round mesh.
The shape of the stainless steel filter mesh: it has a round straight tube and a tapered barrel. It can also be produced according to the needs of customers and is convenient to use. The stainless steel filter cylinder is divided into single layer or double layer composite, and can also be used in multiple layers. The effect of this can be to protect and support the filter in the filter layer. We can produce both welded and filtered filter cylinders. The edging filter cylinder process is complicated and costly. The stainless steel filter cylinder made of stainless steel square mesh has a size of 1 mesh - 635 mesh, and the stainless steel mesh mesh has a mesh cylinder of 30 mesh - 2800 mesh. The stainless steel punching mesh cylinder generally serves as a support or protection.
Performance: with acid resistance, alkali resistance, temperature resistance, wear resistance and other properties.
Uses: used in mining, petroleum, chemical, food, medicine, machinery manufacturing, air conditioning, range hood, washing machine, car engine system, fuel tank, filter pot, fan, sink, air purifier, water pump, faucet, sugar, vacuum cleaner, Coffee machines, centrifuges, water purifiers, straight drinks machines, filters and other industries.
There are more and more products of stainless steel filter cylinders, but there is not much to know about the daily care of stainless steel filter cylinders, so that stainless steel is never rusted, and stainless steel has good corrosion resistance. This is not the case. Here are a few ways to care:
1. When the surface of the stainless steel filter cylinder has dust and dirt, it can be washed with soap, weak detergent or warm water.
2. The trademark and film of the surface stainless steel filter cylinder are washed with warm water and weak detergent. The binder component is scrubbed with alcohol or organic solvent (ether, benzene).
3. The grease, oil and lubricating oil on the surface of the stainless steel filter cylinder are contaminated, cleaned with a soft cloth, and then cleaned with a neutral detergent or ammonia solution or with a special detergent.
4. The surface of the stainless steel filter cylinder has bleaching agent and various acid adhesions. Rinse immediately with water, then dip with ammonia solution or neutral carbonated soda solution, and wash with neutral detergent or warm water.
5. The surface of the stainless steel filter cylinder has a rainbow pattern, which is caused by excessive use of detergent or oil. It can be washed with warm water detergent when washing.
6. The rust caused by the dirt on the surface of the stainless steel can be washed with 10% nitric acid or grinding detergent, or it can be washed with special washing drugs.
7. The part of the passivation film on the surface of the stainless steel filter cylinder has a weak corrosion resistance. The pitting reaction is formed by the self-excited reaction, and small pores are formed. Together with the chloride ions, a strong corrosive solution is formed, which accelerates. The rate of corrosion reaction.
As long as we use the correct maintenance method, we can extend the service life of stainless steel filter cylinders, keeping them clean, bright and gorgeous.
PREVIOUS： Steps and precautions for cleaning rust stains of wire mesh products
NEXT：Do you know what characteristics of stainless steel mesh?
