How to choose the stainless steel wire mesh that suits you?

There are many stainless steel wire mesh on the market, such as stainless steel wire mesh, stainless steel welded wire mesh, stainless steel crimped wire mesh, stainless steel window screen, stainless steel decorative mesh and so on. These are collectively referred to as stainless steel mesh. How to provide effective information for stainless steel wire mesh sellers to get an accurate quote?

Here we briefly introduce several methods: first look at its structure, whether it is weaving or welding. If it is woven, look at its specifications, the relative extent of the mesh and the diameter of the stainless steel wire is stainless steel plain weave or stainless steel woven. The stainless steel crimped web is thinner and the wire diameter is thicker. Generally, the mesh is between 2 mm and 15 cm, and the braided wire is pre-bent, so the mesh is wavy; the stainless steel mesh is from 8 mesh to 500 mesh and is typically used for filters. Divided into one volume, 30 meters a roll. How to distinguish the grid size of the stainless steel mesh, in general, the grid defines the number of grids in the length of one inch, we can calculate the number of grids, like the purpose of 10 to 50, we can use the cloth eye to measure, 50 - For 500 purposes.

We use a mirror to measure density, and an eye density mirror is a professional measurement tool. Another important price factor is the material. The general stainless steel mesh material is divided into 201.304.316.316L, 201 is the most extensive on the market, and the price is low, but because it does not contain nickel, it is easy to rust in acid and alkali, and then 304, is also widely used. This material contains more than 8 nickels, so it has a strong corrosion resistance. 316.316L, containing more than 10 kinds of nickel, has strong anti-corrosion ability, and is generally used in companies with high requirements on unit quality. Stainless steel mesh is a dense mesh, not square hole weave, it is easy to distinguish, according to its specifications, it is also high to low, because of its dense weaving, square holes, so the number of general meshes is multiplied by, for example, 50 * 250 mesh, the latitude is not the same. The above is a simple way to distinguish stainless steel mesh, I hope to help you.