Stainless steel wire mesh use and the cause of the problem?
Car water tank maintenance with Stainless steel wire mesh protection
Water tank radiators and air conditioning condensers often encounter wind, sand, and small flying insects, which may cause problems such as poor heat dissipation, high temperature, and no refrigeration of automobile air conditioners. To solve this problem, it is necessary to clean up the sand, mud, and small flying insects outside the water tank and the radiator. It is very troublesome to clean up. To completely solve this problem, it is necessary to install a stainless steel protective net on the water tank, so as to effectively filter and block flying insects, catkins, poplars, sand and the like to block the radiator of the water tank and the condenser of the air conditioner. The stainless steel mesh is resistant to acid and alkali, and is durable and durable, effectively extending the life of the condenser and the water tank. It is also very convenient to install. Generally, the special attachments for the water tank protection net are all kinds of universal clamps. They can be bent according to the installation requirements, and can be fixed by the original screws or screw holes on the vehicle. The water tank protection net is also very cheap. The general price ranges from tens of yuan to more than one hundred yuan. If the cost of cleaning the air conditioner condenser and water tank is more than the price of the water tank protection net, you can consider buying one. However, it should be noted that the installation of the water tank protection net should also take off the protective net every time, or take a rinse with water. Because the long-term use will block the stainless steel mesh, the water tank radiator and air-conditioning condenser can not dissipate heat.
Causes of blockage caused by stainless steel wire mesh filtration
The causes of clogging during the filtration of stainless steel mesh are various. Since the particles of the material to be filtered are mostly irregular, often containing a large number of particles close to the separation point, the pore size of the stainless steel mesh is less than or equal to the diameter of the particles, and the particles are stuck. The sifting of various viscous powdery materials often sticks to the stainless steel mesh and causes clogging. The material has a fibrous material, and the flaky particles are more, and the woven mesh wire is thick and easily clogging. The solution is: when the material has finer particle size, more shale content, and smaller sieve size, moisture plays a decisive role in the blockage of the stainless steel screen. When the moisture in the material is more than 5%, if the material is dried unconditionally, the sieve surface and the sieve hole should be selected in a targeted manner. When the moisture is greater than 8%, wet screening should be used. For materials with more flake particles, it is necessary to change the material crushing mode and the particle size matching of different crushing processes, and select the appropriate solution by causing the causal characteristics.
PREVIOUS： How much do you know the weaving method of stainless steel wire mesh?
