Industrial News

The best printing time after stretching

12/13/2017

Polyester is a kind of elastic material Silk screen printing mesh is woven by polyester wire, So if the tension is too large, the screen printing mesh are easy to lose elasticity and fracture But if the tension is too small, the mesh will be not tight

Some factors affecting clothes printing

12/13/2017

Polyester screen printing mesh are widely used in cloth printing Printing is through the Squeegee extrusion, the ink is transferred through the graphic part of the mesh to the substrate, forming the same with the original graphic

How to remove the stencil from the mesh

12/13/2017

Sometimes, when you want to save your printing cost on mesh, you can remove the stencil on the mesh, making it possible of re-using your mesh (MAISHI MFG GROUP mesh specification)

Some knowledge you need to pay atte...

12/13/2017

First, the wire diameter should compliance to contract, in general the tolerance not more than 0 2mm, We MAISHI WIRE MESH MANUFACTURE GROUP use micrometer to measure the wire diameter

Higher Mesh Counts & Lower Thread D...

12/13/2017

An older way of thinking about screen printing tee shirts or other garments is to use lower mesh counts to achieve better coverage and color While it is true that leaving more ink on a fabric will tend to make it more opaque, there are better

The meaning of mesh specification parameter

12/12/2017

A thinner thread diameter, so more ink is applied to the substrate Ideal for opaque printing to textiles, for example 53S-48(135mesh) ”T” : Standard mesh thread diameter, used for most printing jobs, for example 53T-55(135mesh)

How to improve the pressrun of the screen printing

12/12/2017

To improve the pressrun of the screen printing, first of all to enhance the adhesive force between the glue and mesh, which is the basis of screen printing

Some important notes about higher mesh counts and yellow mesh

12/12/2017

Generally, lower mesh count(like 110 mesh) will be easier to print with and deposit more ink But when you want to print fine lines with details, the 110 mesh count becomes difficult to work with You need to choose the mesh appropriately