The specification of Stainless steel wire mesh has certain requirements. What are the specific normal requirements?
The diameter of the stainless steel wire mesh is matched with the size of the mesh, instead of simply the diameter of the wire. Regarding the plaster layer, the mesh should not be larger than 20×20, the diameter is not easy to be less than 1mm, and the diameter is not much meaning. 40×0.9 and select 10×10×0.6 steel wire mesh, which is very good, I am afraid it is 10×10×0.6. The effect of the steel mesh in the plastering of the external wall is firstly a way to prevent falling from
the safety point of view. The effect of crack resistance is relatively small, because of the orientation problem; and the external thermal insulation system is used in the external thermal insulation system. Face tile finish, as for the effect, it is probably anti-drop, and the next is anti-cracking. In this case, the grid is selected 10×10×0.6. These are some experience selections. The grid is converted from the specifications of the national wire mesh. , use the grade conversion of steel content.
Stainless steel wire mesh galvanizing is more important than wire diameter. The amount of galvanizing is very important. It must be hot-plated. The first plating is better than the first plating. As for the wire diameter, the on-site construction and satisfactory safety requirements are summarized. 0.6~0.7 As well.
We need to follow your own actual requirements when purchasing, it is a very cost-effective choice! We look forward to your inquiry!
More popular articles
- Stainless steel wire filter cloth is different from general mesh products
- High quality plain stainless steel wire filter manufacturer
PREVIOUS： Stainless steel mesh filter cloth filter bag
NEXT：How to analyze the principle of stainless steel filter mesh in water filtration
