What are the requirements for the warping process when making stainless steel wire mesh?

The warping process of stainless steel wire mesh is very important. The specific requirements for the warping process of stainless steel wire mesh are introduced by maishi manufacturers as follows:

1. The length of each warp yarn on the warp beam must be consistent and meet the requirements of the contract task to prevent multiple turns and fewer circles.

2. The width of the warp yarn on the warp beam should be consistent with the width of the web; the position of the warp yarn on the warp beam must correspond to the position of the steel frame of the loom and cannot be skewed.

3. When warping, the warp tension should be appropriate. If it is too large, the warp will produce unexpected elongation, which will damage the mechanical properties of the warp yarn, and increase the warp yarn breakage during the weaving process. If it is too small, the warp beam will be easily trapped during the weaving process. This causes the defects such as the pressure line, which seriously affects the quality of the product and even makes the weaving impossible.

4. During the warping process, the tension of the whole warp yarn should be uniform and kept as constant as possible. Otherwise it will increase the warp breakage and affect the quality of the woven mesh.

5. The warp beam density on the warp beam should be kept uniform, the surface should be cylindrical, and the warp beam full width has no soft and hard unevenness or unevenness.

When the stainless steel wire mesh is made, the warping process requirements are the above. Professional manufacturers maishi products are professional in both warping and doing other things. It relies on technology and professionalism to be more trustworthy.

PREVIOUS： What are the characteristics of the manufacturer's Stainless steel filter mesh ?

NEXT：Only 316 stainless steel wire mesh for harsh environments