Requirement of weaving wire mesh
When weaving the wire mesh, we must ensure the cleanliness of the wire mesh screen and ensure that there is no oil stain on the mesh screen. When the wire mesh is removed from the screen, it is necessary to pay attention to the oil pollution on both sides of the mesh shaft.
This is an unqualified product and cannot be marketed. There is no turning phenomenon, that is, the latitude and longitude lines of the screen cannot be bent. When producing mesh products, ensure that the mesh is flat and firm. The weft is easy to weave and the mesh is strong. The screen surface is pressure. The key part of drying.
The wire mesh produced by Maishi MFG factory has two-way wave bending, flat top bending, two-way bending and locking bending to avoid mesh and surface unevenness. The robustness of the screen is to adjust the depth of the screen to press the wire and make the wire mesh. The surface guarantees strength, and the woven mesh and weft yarns cannot slide after weaving.
The key to the surface of the wire mesh is to straighten the warp and weft before weaving or welding the wire mesh machine. The depth of the weft mesh is the total energy of the wire machine's working efficiency. The depth of the wire is related to the efficiency of the wire, the weft in the wire machine "Strong" is the network cable, and the weft is the network cable. When it is manufactured or carried, a hole does not move. The wire mesh size is diverse, the price is low, and the function is firm.
PREVIOUS： Stainless steel wire mesh of 325 mesh
