Stainless steel wire mesh is very widely used, and the problems associated with welding are generally frequent. Stainless steel wire mesh has its own characteristics. Compared with ordinary carbon steel, the welding and cutting of stainless steel wire mesh is quite distinctive.
Stainless steel wire mesh welded joints and heat affected zones are more susceptible to a variety of defects than mild steel. So in stainless steel wire mesh, special attention should be paid to physical properties. The austenitic stainless steel wire mesh is
1.5 times that of a stainless steel mesh. The resistance is 4 times higher than that of mild steel. The high chromium stainless steel mesh is three times that of low carbon steel. These conditions, together with the density, surface tension, and magnetic properties of the metal, have a certain influence on the welding conditions.
Stainless steel wire mesh is used in a variety of industries, and each industry requires stainless steel wire mesh in different shapes. Therefore, if the manufacturer chooses to cut or weld sometimes, there are still many problems that we should notice.
More popular articles
- Stainless steel wire mesh filters gases, liquids and solids
- What is the best way to distinguish the material of the stainless steel wire mesh screen?
PREVIOUS： Stainless steel wire mesh belt can be used at temperatures above 400 degrees Celsius
NEXT：High quality 316 stainless steel wire mesh introduction
