Sometimes friends who buy stainless steel wire mesh say that the paint will fall. What are the reasons for the drop?
Stainless steel wire mesh in use, in the absence of surface friction, simple filtration or protection, because the surface is not smooth, dull or rust due to long-term use in nature (stainless steel will also rust), so consider stainless steel The process of painting the surface of the wire mesh, but some customers will say that the stainless steel wire mesh is easy to fall after painting.
Now let's analyze the reason why the stainless steel wire mesh paint is easy to fall. The temperature is not enough. Please pay special attention to the use of good quality powder. Before entering the stainless steel wire mesh to reach the spray chamber, the temperature of the oven must reach 200 degrees or more. If it is not enough, the powder will not be fully melted at a high temperature, and it will not be good if it is fixed on the mesh.
What are the reasons for the drop of the spray of stainless steel wire mesh?
Maishi is an experienced manufacturer of stainless steel wire mesh. For us to solidify the stainless steel wire mesh paint drop reason: the powder quality is not good, the most important thing is because the powder particles are not very the same. In this case, the powder will not be fully melted at a high temperature. Its adsorption power will not be very good.
If the surface of the mesh is not very hygienic, it will affect the adsorption of the distribution.
The selection of stainless steel wire mesh produced by regular manufacturers is guaranteed. We will be more assured of quality, price and after-sales service.
More popular articles
- Stainless steel mesh woven mesh according to the classification
- What is the process of heat treatment of stainless steel wire mesh?
PREVIOUS： High temperature resistant stainless steel wire mesh temperature reaches 1000 degrees
